12-bit PCI Digitizer Board: 1250X | GaGe

1250X CompuScope
12-Bit, 500 MS/s, PCI Digitizer / Oscilloscope Board

The GaGe 1250X CompuScope PCI digitizer board features 12-bit resolution with sampling rates up to 500 MS/s with true Effective Number of Bits (ENOB) of up to 9.5-bits with 200 MHz input.

Onboard digitizer sample memory is expandable up to 2 GS and up to 8 1250X digitizers can be combined for up to 16 channels in a single system.

12-Bit Digitizer PCI Board: 1250X

1250X Data Sheet

Supporting Software

USD Prices Start at: $8,115

Request Quote

Digitizer Features

  • 1 or 2 Digitizing Channels
  • 500 MS/s Maximum Sampling Rate per Channel
  • 12-bits Vertical A/D Resolution
  • 128 MS to 2 GS Onboard Acquisition Sample Memory
  • 350 MHz Input Bandwidth
  • Full-Featured Front-End with AC/DC Coupling and
    50Ω Inputs
  • Software Control over Input Ranges, Coupling & Impedances
  • Ease of Integration with External or Reference
    Clock In & Clock Out
  • External Trigger In & Trigger Out
  • Full-Size Single-Slot PCI 32-bit 66MHz Board
  • PCI Standard for 200 MB/s Transfer to PC Memory
  • Supports eXpert FPGA Signal Averaging
  • Programming-Free Operation with
    GaGeScope PC Oscilloscope Software
  • Software Application Development Support with
    CompuScope SDK for C/C#
    CompuScope SDK for MATLAB
    CompuScope SDK for LabVIEW

Digitizer Ordering Information

1250X CompuScope Products and Part Numbers
CS12501 1 Channel @ 500 MS/s, 12-bits,
128 MS Memory, 350 MHz Bandwidth
AC/DC Coupling, 50Ω Input
CS12502 2 Channels @ 500 MS/s, 12-bits,
128 MS Memory, 350 MHz Bandwidth
AC/DC Coupling, 50Ω Inputs
eXpert Firmware Options
eXpert Signal Averaging Firmware Option 250-181-001
Memory Upgrades
Memory Upgrade: 128 MS to 256 MS 120-181-001
Memory Upgrade: 128 MS to 512 MS 120-181-003
Memory Upgrade: 128 MS to 1 GS 120-181-005
Memory Upgrade: 128 MS to 2 GS 120-181-007
Auxiliary Input/Output
Auxilary Input/Output Option for CS12501 120-181-101
Auxilary Input/Output Option for CS12502 120-181-102
Master/Slave Upgrades
Master Multi-Card Upgrade 120-181-012
Slave Multi-Card Upgrade 120-181-013
Set 1 SMA to BNC cable ACC-001-031
Set 4 SMA to BNC cable ACC-001-033
GaGeScope® Software
GaGeScope: Lite Edition included
GaGeScope: Standard Edition 300-100-351
GaGeScope: Professional Edition 300-100-354
Software Development Kits (SDKs)
GaGe SDK Pack on CD 200-113-000
CompuScope SDK for C/C# 200-200-101
CompuScope SDK for MATLAB 200-200-102
CompuScope SDK for LabVIEW 200-200-103